SPONSORED LINKS

Why wont my truck Move?

Tiny
KALL55
  • MEMBER
  • 1989 CHEVROLET TRUCK
Just got a new trani put in my 89 scottsdale chevy. It starts and runs just fine it has 40 psi in the cooling line and when you you shift there the gears the rpm drops like it should but it does nothing. It wont move.
Sunday, October 2nd, 2011 AT 9:16 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,179 POSTS
If the RPM's drop, it is going into gear. When you hit the gas, does it sound like it is in neutral or is there a load on the engine?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 9:51 PM
Tiny
KALL55
  • MEMBER
  • 2 POSTS
Like it's in neutral. There is no load on the engine.
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 10:53 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,179 POSTS
Either there is a problem with the linkage or the trans is no good.
Was this
answer
helpful?
Yes
No
Monday, October 3rd, 2011 AT 4:42 AM

Please login or register to post a reply.

Related Engine Revs Up Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links