BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
Just installed high volume oil pump and now I started shearing gears on distributor what do I do
1988 FORD MUSTANG
Turn car on get timing corect go for test drive and shears teeth from gear on the distributor
have the same problem?
Wednesday, December 14th, 2011 AT 4:44 AM
Either the cam or the distributor is installed incorrectly. Or the gears aren't matching up properly. Also make sure that nothing is binding the distributor shaft.
I hate to say it, but you should probably also verify that nothing is causing the pump to bind.
Wednesday, December 14th, 2011 AT 4:49 AM
to post a reply.
Related Oil Pump Gear Questions
Oil Pump Housing Leak Mustang 1998 Gt
98 Mustang Gt 4.6 V8 Oil Pump Leak. It Appears Oil Is Coming Out The Pin Hole In The Bottom Of Housing Were Oil Filter Is Connected. Should...
Engine Oil Pump Upper Drive Shaft
I Need An Engine Oil Pump Upper Drive Shaft For A 1986 Svo Mustang But The Part Is Unavailable. Do You Know If The Same Part From A 1990...
Looseing Oil Preshure Going To Get Some Mecanical...
Looseing Oil Preshure Going To Get Some Mecanical Readings But How To Tell If Ur Oils Pump Is Going Out And How To Tell If Ur Berings Are...
1993 Ford Mustang How Much Oil Pressure Is Too Much?
Engine Mechanical Problem 1993 Ford Mustang V8 Two Wheel Drive Automatic 20 Miles I Have A 93 Mustang With A Wound Up 306 That I Just...
Ask a Car Question. It's Free!
Low Oil Pressure
High Engine Oil Pressure
Oil Change & Filter Replacement Kia Rio
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.