1987 Ford Ranger nuetral safety switch

DONOOK64

MEMBER
1987 FORD RANGER
2.9L
V6
2WD
AUTOMATIC
110,000 MILES

Manual says I need special tool to remove old it screws in like a spark plug but due to location cant get a socket on it or a wrench cant find special tool or even an answer anywhere

5 Replies

WRENCHTECH

EXPERT

It doesn't thread in. It bolts to the housing

http://i1198.photobucket.com/albums/aa448/Wrenchtech/42293559.gif

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Monday, March 10th, 2014 AT 9:20 AM

DONOOK64

MEMBER

Seems there r 2 types transmissions 1 bolts in like u say I have the c5 it threads in looks like a sparkplug Haynes manual says need special wrench

Was this

answer

helpful?

Yes

No

Monday, March 10th, 2014 AT 11:59 AM

WRENCHTECH

EXPERT

That IS a C5 in the picture

Was this

answer

helpful?

Yes

No

Monday, March 10th, 2014 AT 12:45 PM

WRENCHTECH

EXPERT

Here is the part of the picture you didn't see

http://i1198.photobucket.com/albums/aa448/Wrenchtech/Neutralswitch87Ranger.jpg

Was this

answer

helpful?

Yes

No

Monday, March 10th, 2014 AT 12:49 PM

DONOOK64

MEMBER

It looks like a sparkplug no bolts hang it in it screws in I have the new one also no slots for anything manual says c has bolts under c it says c5 or auld transmissions anyway new problem did diagnostic test according to manual run jumper wire from possible to relay starter spun b it now when I go to put pos terminal back on starter keeps engaging with no key in is relay damaged now set on open thank you for ur time