Centre consol;e removal

R and R Center Console Upper & Lower Cover

Cover, top
Removal

Pull out ashtray and remove insert.

Unscrew fastening screws.

Remove ashtray. Pull off connections for cigar lighter and light.

Remove radio.
Pull knobs (1) from switches and unscrew nuts (2).

Remove all switches.
Unscrew fastening screws.

Pull out cover below slightly and remove in downward direction.

Pull out socket with bulbs of symbol lights.
Installation

For installation proceed vice versa.
Cover, bottom
Removal

Remove tray (ashtray removed).

Up to 08/85

Remove switch.
Push cover forward and remove.
As of 09/85

Push cover forward and remove partly.
Pull coupling off switch and remove cover.

Unclip switch from below cover (arrows).
Installation

For installation proceed vice versa.

© 2012 ALLDATA LLC. All rights reserved.
Terms of Use

Removal and installation of instrument cluster

Note:

The instrument cluster is held in cutout by means of a rubber profile strip.

For pulling out instrument cluster, the instrument panel can be slightly raised above cluster or pushed out from below. To prevent any damage of front frame, do not force out instrument cluster by means of a screwdriver or the like.

Removal

1 Remove steering wheel.
2 Pull out instrument cluster as far as possible, loosen tachometer shaft, the two electric plug connections and the oil pressure line, then remove instrument cluster.

Installation

3 For installation proceed vice versa.

Note: When connecting tachometer, make sure that the tachometer shaft is not bent too much, since this might cause running noises.

Goood luck

Roy