No spark, no start

Tiny
FRAZZ
  • MEMBER
  • 1983 GMC S15
  • 6 CYL
  • 2WD
  • MANUAL
  • 100,000 MILES
1983 GMC S-15 Sierra pickup, 2.8 V6, no spark. Replaced coil and coil wire, still no spark. What to check next? Ignition module? How to check the ignition module?
Saturday, December 11th, 2010 AT 10:08 PM

6 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check and test the distributor pick-up coil if okay bring the ICM in and get it tested or swap it and see what happens-this the last place you check if there's no spark-and coil checked out
Was this
answer
helpful?
Yes
No
Saturday, December 11th, 2010 AT 10:44 PM
Tiny
FRAZZ
  • MEMBER
  • 3 POSTS
Pick-up coil is okay. Have an ICM coming to swap in next. Will keep my fingers crossed. Thanks.
Was this
answer
helpful?
Yes
No
+1
Tuesday, December 14th, 2010 AT 12:21 AM
Tiny
FRAZZ
  • MEMBER
  • 3 POSTS
Replaced ICM. Engine started right up. Thanks.
Was this
answer
helpful?
Yes
No
+1
Thursday, December 16th, 2010 AT 11:21 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Good Job and TY for coming back with the fix-Happy Holidays
Was this
answer
helpful?
Yes
No
+1
Thursday, December 16th, 2010 AT 11:26 PM
Tiny
JACOB SHUFF
  • MEMBER
  • 1 POST
I’ve got a gmc s15 1989 I’ve replaced all spark plugs throttle body plug wires and Its still not starting can someone help me out
Was this
answer
helpful?
Yes
No
Friday, January 11th, 2019 AT 7:57 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,883 POSTS
Thanks for the video really helps. It sounds like the engine has no compression but to confirm the issue lets run down this guide.

https://www.2carpros.com/articles/how-to-test-engine-compression

Please run down this guide and report back.
Was this
answer
helpful?
Yes
No
Sunday, January 13th, 2019 AT 11:31 AM

Please login or register to post a reply.

Sponsored links