PONTIAC ENGINE

My 03 Aztek Wont Start Or Come Out Of Park. We Have Took The Cup Holder Out Where Shifter Is And There Is A Little Pin And If U Pull It Out...

The Car Listed Above Is A Gtp Sc 3.8-. I Am Wondering What I Should Apply On The Threads Of Head Bolts, Rocker Arm Bolts, And Intake Bolts...

I Have Been Working On Replacing The Passenger Side Valve Cover Bolt "grommet" Gaskets, And I Have Run Into A Problem. So, I Was Told By A...

I Am In The Process Of Repairing A Blown Head Gasket On A 98 Pontiac Transport With 106,000 Miles. I Have Removed The Front Head And Feel...

Ok, So My Car Was Having A Heat/cold Air Issue. Then It Did Start Leaking Coolant And Overheating. Took It In To Be Looked At $550 To Fix...

Check Eng. Light Came On Had Car Checked Was Told It Was Mass Air Flow Sencor Spray Didn't Work But Car Would Run Now That I Put New Sencor...

I Have Diagnosed The Problem Indicated By My "service Engine Soon" Light Coming On Thru The Auto Parts Store - Purchasing Mass Air Flow...

My Car Has A Blown Head Gasket, And I Was Wondering How Much It Will Cost To Replace It.

Well, I've Had This Car For Roughly 6 Months. Previous Owner Really Didn't Take Too Good Care Of It, Never Replaced Plugs/wires, Clutch...

Specs Say Tighten Valve Cover Bolts To 89 Ft. Lbs. Can't Do It. I Would Twist Them Off. I Tightened Them To Maybe 20 Ft Lbs And I Think...