GMC YUKON ENGINE STALL AT IDLE

Found 5 results

Stalling At Low Speeds And Stops

My Suv Has Low Idle (500 Rpm), Sporadic Shifting Between 2,500 Rpm's And 1,000 Rpm's. Sometimes Will Go From 2500 To 1000 And Level...

Asked by chriskimgibbs ·

5 ANSWERS

1 IMAGE

2008

Engine Stalls After Dead or New Battery

Engine Stalls After Dead or New Battery

So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...

Why Does Engine Sometimes Stall At Startup

When I Turn Key Sometimes It Just Makes A Grinding Noise, Then I Turn It Again And My Truck Starts Up But Right Away Starts Shaking And...

Asked by choochie77 ·

1 ANSWER

1997

1998 GMC Yukon Starts Runs For 2 Secs Then Stalls

I Disconnected The Battery To Install A Nutral Safety Switch Sucessfully. Than I Removed The Instrument Cluster To Troubleshoot An Inop Tach...

Asked by jmurphy1962 ·

5 ANSWERS

1998

Engine Stalling When Slowing To A Stop

Engine Was Stalling When We Slow To A Stop But Would Work After Car Sat For A Bit. Took It To Repair Shop And They Said It Was Crank Shaft...

Asked by Valerie Hulshof ·

4 ANSWERS

2004

Code P3003 Rough Start When It Is Humid, Stalls When...

Okay, I Have Changed Ignition Coil. I Have Changed Out Both Cam And Crank Shaft Sensors. They Were Throwing Codes. Truck Runs Slightly...

Asked by AmazonGuy ·

1 ANSWER

1999

Ask a new GMC Yukon question

Sponsored links

Ask a Car Question. It's Free!

SPONSORED LINKS

Online car repair manuals

Online car repair manuals

© 1999 - 2024 2CarPros, Inc.