FORD FUSION ENGINE

Engine Will Not Accelerate?

Car Listed Above Is The Se Model. Idles Rough, Wont Take Any Throttle. Have Already Replaced Turbo, Throttle Body, Both Camshaft Sensors...

Asked by Mach69 ·

21 ANSWERS

1 IMAGE

2014

Hybrid Engine

A computer system is used to help choose which engine will be more efficient at any given time. In most cases the electric motor will start the vehicle in motion, while the...

Five Volt Reference Voltage Circuit C Low No Starting...

I Have A Tdci. The Car Has A Five Volt Reference Voltage Issue. The Engine Code Showed A Low Circuit C Voltage Issue. As A Result Of This...

Asked by FusionTDCI2007 ·

4 ANSWERS

10 IMAGES

2007

Overheated And Will Not Start

Arrived Home Sat In Car On Idle Using Phone And Notification “engine Coolant Over Temperature “ Turned Engine Off Immediately Checked...

Asked by Dm1979 ·

3 ANSWERS

6 IMAGES

2016

Where Is The Oil Pressure Sensor Located?

Location Of Oil Pressure Sensor?

Asked by Joey1974 ·

1 ANSWER

3 IMAGES

2018

Engine Low Power Problem?

My Car Just Recently Stopped Accelerating Like Normal It Is Like Holding Back When I Push The Pedal Down Then The Rpms Jump And Then Go Back...

Asked by Helpme9111 ·

19 ANSWERS

2007

Oil Pressure Light Not Turning On When Starting The...

I Was Wondering Why My Oil Pressure Light Is Not Turning On In My Car? Previously When I Started The Car All The Warning Lights Would Come...

Asked by Carlos Gutierrez ·

1 ANSWER

2 IMAGES

2010

Fuel Economy

Getting the Best Mileage from your Gas - It is no secret gas prices are up and putting a big pinch on our pocket books. Car maintenance and driving habits significantly ...

Serpentine Belt Routing Diagram

Can You Please Give Me The Serpentine Belt Routing Diagram? Thank You

Asked by holmhome ·

3 ANSWERS

1 IMAGE

2006

Engine Shut Off When A/C Was Turned On, Will Not...

I Started The Car The Other Day And Turned On The A/c And My Car Instantly Shut Off And I Cannot Restart It. No Clicks, No Sounds, No...

Asked by Joey Voss ·

16 ANSWERS

2014

Can I Get The Serpentine Belt Diagram?

I Need A Serpentine Belt Diagram For The 3.0 V6. Thank You

Asked by Cesargabrieljr ·

1 ANSWER

1 IMAGE

2012

Crank But No Start After Front Crankshaft Seal...

Replaced Front Crankshaft Seal, Put Everything Back Together But Car Won’t Start. It Cracks But No Start. Do I Need To Readjust The...

Asked by Abel Bueno ·

1 ANSWER

2009

Ask a new Ford Fusion question

Ask a Car Question. It's Free!

© 1999 - 2025 2CarPros, Inc.