CHRYSLER TOWN AND COUNTRY CYLINDER HEAD VALVE COVER

Found 5 results

Select a filter to limit the results

Valve Cover Gasket Replacement

I Have Oil Leaks From My Valve Cover. Is The Valve Cover Gasket Difficult To Replace On This Car? It Looks Like The Valve Cover In The...

Asked by Zog1974 ·

1 ANSWER

4 IMAGES

2005

CHRYSLER TOWN AND COUNTRY

Engine Oil Leak

Engine Oil Leak

A car engine uses motor oil to lubricate the internal moving parts of the engine such as crankshaft, rod bearings, pistons and valve train. This oil is controlled from...

2000 Chrysler Town And Country Idle About 3500

I Removed The Intake To Replace The Valve Cover Gaskets And Replace Spark Plugs. After Reassembling I Started The Van And The Rpm Went To...

Asked by Chris Murvine ·

2 ANSWERS

2000

CHRYSLER TOWN AND COUNTRY

Using A Lot Of Oil And Has A Lot Of Air Flow Through...

I Just Put A "good" Used Engine In My 98 Town & Country 3.8l. It Puts Out A Cloud Of Smoke On Startup. It Has Used 2 Quarts Of Oil In About...

Asked by rubantin ·

4 ANSWERS

1998

CHRYSLER TOWN AND COUNTRY

2000 Chrysler Town And Country Valve Cover

How Do You Replace The Rear Valve Cover Gasket On A 3.8 V-6? Tried To Remove The Intake And Not Enough Room. Also Would Like To Replace...

Asked by j.rooney ·

1 ANSWER

2000

CHRYSLER TOWN AND COUNTRY

2000 Chrysler Town And Country Idle About 3500

I Removed The Intake To Replace The Spark Plugs And The Valve Cover Gaskets. After Reinstallation Once The Car Is Started The Idle Goes To...

Asked by Chris Murvine ·

1 ANSWER

2000

CHRYSLER TOWN AND COUNTRY

Ask a new Chrysler Town and Country question

Sponsored links

Ask a Car Question. It's Free!

SPONSORED LINKS

Online car repair manuals

Online car repair manuals

© 1999 - 2024 2CarPros, Inc.