http://www.2carpros.com/articles/car-cranks-but-wont-start

Get a helper disconnect a sparkplug wire or 2 and ground it to the engine atleast 3/16 away from ground-have helper crank engine over-do you have a snapping blue spark? If so-you have a fuel related problem, Do you hear the fuel pump come On when you turn key on? If not check fuel pump fuse and fuel pump relay if okay-check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light. No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,cap and rotor,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it and keep testing

Answered by rasmataz
68 questions asked

Yeah we have tested the spark plugs and there is no spark. We have turned the ignition and the fuel pump cuts on. The fuses are ok.We need to know how to test the coil on the distributor, cap, or crankshaft. We hooked the scanner and no codes are pulling.

Response from cderrick23
1 question asked

Check the Crankshaft Position Sensor (OBD)On transmission housing, facing flywheel gear teeth.

Answered by rasmataz
68 questions asked

I wish we could but we cant reach it.We are looking at the distributor now.

Response from cderrick23
1 question asked

While we are checking the distributor, the rotor turns, but shouldn't it be some fire from the hole to send to each plug?

Response from cderrick23
1 question asked

Also, when we check the harness going to the distributor with a test light, it doesn't light up.

Response from cderrick23
1 question asked

No power check ignition fuse and test the coil-also rotor and cap buttons

Answered by rasmataz
68 questions asked