Temp gauge

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Look at the wire diagram I posted it shows a single green wire going to the gauge temp sensor. Also look at the sensor locations I posted it also shows a seperate sensor for the gauge. Find the sensor with a single green wire turn the key to the run position engine off. Ground that green wire and see if the temp gauge reads all the way hot. If it does you know the wire and gauge is good.
Was this
answer
helpful?
Yes
No
+1
Saturday, December 10th, 2011 AT 2:08 AM
Tiny
MRTOO
  • MEMBER
  • 17 POSTS
When I changed that one coolant did come out your saying thats not the right one which is the one thats supposed to be on the water pump? Thinking maybe that wire all the way up by the firewall is to go to the right bottom for the gauge
Was this
answer
helpful?
Yes
No
Saturday, December 10th, 2011 AT 2:37 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
The one on the water pump or bellow the water pump with two wires going to it is for the computer. Please look for the one I posted a diagram for and try what I suggested and see what happens. Let me know what you find.
Was this
answer
helpful?
Yes
No
Saturday, December 10th, 2011 AT 2:46 AM

Please login or register to post a reply.

Sponsored links