SPONSORED LINKS

1995 Ford F-350 FRONT WHEEL BEARING ASSEMBLY

Tiny
RICHTERRDF
  • MEMBER
  • 1995 FORD F-350
  • 7.3L
  • V8
  • TURBO
  • 4WD
  • AUTOMATIC
  • 360,000 MILES
NEED DRAWING OF BREAKDOWN FOR FRONT AXLE AND BEARING AERA. WAS ORGINALY 4X4 ON THE FLY BUT AFTER LOTS OF CONTINUAL PROBLEMS FORD SERVICE CHANGED OVER TO MANUEL LOCKING HUBS. I BELIVE I HAVE BEARINGS GOING OUT AND NEED TO WORK ON IT MYSELF.
Monday, April 21st, 2014 AT 10:48 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Removal
Remove 6 bolts and remove manual locking hub cover. Remove snap ring retaining axle shaft in hub body assembly. Remove locking hub body-to-wheel hub lock ring. Install 2 bolts to remove locking hub body. See Fig. 4.
Installation
To install locking hub, reverse removal procedure. Tighten bolts to 35-53 INCH lbs. (4-6 N.M). DO NOT pack locking hub cover with grease
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, April 21st, 2014 AT 12:19 PM

Please login or register to post a reply.

Related Wheel Bearing Replace/Remove Content

Wheel Bearing Replacement
VIDEO
Wheel Bearing Replacement
Instructional repair video
CV Axle Bearing Press
GUIDE
CV Axle Bearing Press
This guide will show you how to use a hydraulic press to install an axle bearing into a spindle which holds a CV axle on either the front or rear of your vehicle. We are a...
VIEW MORE

Sponsored links