Holden HQ Questions
- 1974 Holden HQ Electrical Problem
- I took the ingintion barrel out as i lost my keys i have been trying to start it with the bar that runs down the steering shaft to the ...
- Asked by jasonhq about 1 month ago - 6 Answers
- 1972 Holden HQ
- I have rebuilt 253 v8 engine and the oil pressure drops at idling speed 500rev/min to 0 pick up to15 psi 600rev/min when put auto in gear ...
- Asked by (pending member) about 5 months ago - 1 Answer
- 1972 Holden HQ Brakes Problem with 91000 miles
- Have problem with brakes on the Hq 1 tonner. The left hand side when bled brakes no air bubbles present but on the right side you think all ...
- Asked by stuart knight about 6 months ago - 1 Answer
- 1971 Holden HQ problem
- 1971 Holden HQ 71 cam problem sir; i have have a 71 hq holden that we have put a vk holden carby engine that has been going well, now my ...
- Asked by loriphillip7 about 2 years ago - 4 Answers
- 1971 Holden HQ problem
- Sir; i have have a 71 hq holden that we have put a vk holden carby engine that has been going well, now my trouble is, after an engine ...
- Asked by loriphillip7 about 2 years ago - 2 Answers
- 1971 Holden HQ problem
- How do I set the cog that the starter ratchet runs in? I have removed the ignition lock and am having trouble lining up the cogs to ...
- Asked by Graham Wilesmith about 2 years ago - 0 Answers
- 1971 Holden HQ problem
- Holden 1971 Hg 186 Does it have a timing chain?
- Asked by Brian Roberts about 2 years ago - 0 Answers
- 1972 Holden HQ problem
- Electrical problem 1972 Holden HQ 6 cyl Two Wheel Drive Manual ? miles My 202 red motor is shorting out at the at every place from the ...
- Asked by bunge20395 about 2 years ago - 2 Answers