CAMSHAFT

I Have A 1995 Dodge Grand Caravan With A 3.3 V6 That Jumped Time. I Have Replaced The Timming Chain And Gears. I Have The Timming Marks Set...

The Clynder Lock With The Key Does Not Activate The Actuator. I Removed The Cylinder Lock Assembly And Foind The End Broke Off In The...

I Bought This Vehicle From My Mechanic.350 Chevy Engine.I Have Only Driven 70 Miles Under 40 Mph In Town.I Noticed A Hesitation In It.I Took...

I Replaced The Camshaft Position Sensor, And The Connector Had Some Bare Wires Showing And They Were Twisted All Together, So I Replaced...

I Want To Know Exact Tappet Gap For Inlet Amd Oulet Valves.

If A Lifter Were Bleeding Down, Not Pumping Up Or Partially Pumped Up, Could A Valve Partially Open? This Is A General Hydraulic...

1970 / 472 Cylinder 5, 1 Push Rod Bent Car Sitin For 2 Years Replacedd Push Rod Bent Again, Lifter Bad? Can I Run Engine With Out That...

Not Kidding - No Crazy Changed Timing Belt Recently. Cleaned Computer Plugs, Cam Shaft Sensor Plugs, New Spark Plugs, New Air Filter...

Engine Mechanical Problem 2000 Isuzu Trooper 6 Cyl Automatic How Can I Git The Lifter Unstuck Without Takin It Out Any Hints?

My Engine Died At A Stop Light Yesterday And Now It Wont Restart. It Just Stalled Out With No Major Sputtering Or Anything Like That. I...