Car will not Move in any gear

Tiny
QAZX4234
  • MEMBER
  • 2003 MAZDA 6
  • 2WD
  • AUTOMATIC
  • 150,000 MILES
I can start car runs fine. I can move gearshift to any gear, but car sounds like it wants to move but does not. When I put it back into park it makes a loud noise.
Friday, August 17th, 2018 AT 1:25 PM

4 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 43,072 POSTS
Hello,

This sounds like a CV axle is broken at the outer CV joint. Start the car and put in in reverse them look under the car you might need to jack it up a little. If you see one axle turning it is and here is a guide to help you see what you are in for when changing it out:

https://www.2carpros.com/articles/replace-cv-axle

Please run down this guide and report back.

Cheers, Ken
Was this
answer
helpful?
Yes
No
+1
Saturday, August 18th, 2018 AT 6:40 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,328 POSTS
Hi and thanks for using 2CarPros.com.

The loud clunk you hear when you place it in park, is it coming from the transmission? If it is, that may be the parking paw locking into park while the transmission is still turning inside. The first thing I want you to check are the half shafts (front axles) on the vehicle. If you have a broken CV joint, that would be why the car is not moving and the transmission clunks when you put it back into gear. Here is a link that describes its purpose as well as shows a picture of one so you can find it under the front of the vehicle:

https://www.2carpros.com/articles/how-a-cv-joint-works

Let me know what you find or if you have questions.

Take care,
Joe
Was this
answer
helpful?
Yes
No
+1
Saturday, August 18th, 2018 AT 6:41 PM
Tiny
QAZX4234
  • MEMBER
  • 2 POSTS
Yes it was a broken CV joint. Thank you so much I just fixed it again. Thank you
Was this
answer
helpful?
Yes
No
Tuesday, August 21st, 2018 AT 12:50 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 43,072 POSTS
Nice work, we are here to help, please use 2CarPros anytime.

Cheers, Ken
Was this
answer
helpful?
Yes
No
Wednesday, August 22nd, 2018 AT 9:48 AM

Please login or register to post a reply.

Sponsored links