1993 Toyota Corolla control break system

Tiny
GHATMAIL
  • MEMBER
  • 1993 TOYOTA COROLLA
  • 4 CYL
  • FWD
  • MANUAL
  • 106,000 MILES
Hello again and sorry,
How can I test that my car break system is doing well and right?
I don't mean I want it to do better than what it is on the first day of its usage. I want to know is my break system doing as what it must be or it is doing in the lower degree of what it was? It is in normal condition or is worst?
Is there a simple test for getting it?
Thank you so much
Hatam Ebrahimi
Do you
have the same problem?
Yes
No
Monday, January 4th, 2010 AT 4:26 AM

1 Reply

Tiny
MMPRINCE4000
  • EXPERT
Brake pedal should be hard, not mushy or soft.

Remove wheels, after jacking car up and putting on stands, inspect rotors for wear (grooves) and pads for thickness. On rear if equipped with drums, check shoes for thickness, wheel cylinders for leaks, and drums for wear (grooves).

Brake fluid in MC should be light brown clear liquid. If dark or black, you should flush the brake system and replace fluid with fresh fluid.
Was this
answer
helpful?
Yes
No
Monday, January 4th, 2010 AT 9:00 AM

Please login or register to post a reply.

Recommended Guides