Starting issues

GGERG123

MEMBER
2005 TOYOTA SEQUOIA
4.3L
V8
4WD
AUTOMATIC
150,000 MILES

I had to replace the ignition key switch and now when I turn the key to start the starter turns over but when I let the key go to the run position the starter continues to turn over. I replaced the ignition switch and still the same issue. I am lost at this point. Please someone.

5 Replies

JACOBANDNICKOLAS

MECHANIC
108,320 POSTS

When the starter continues to turn the engine, does it eventually turn itself off or do you have to disconnect the battery?

Let me know.
Joe

Was this

answer

helpful?

Yes

No

+1

Friday, December 27th, 2019 AT 11:11 PM

GGERG123

MEMBER
3 POSTS

Yes, that's exactly what it's doing. Also, the tachometer doeskin move. Everything else electrical is fine.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Sunday, December 29th, 2019 AT 12:54 PM

JACOBANDNICKOLAS

MECHANIC
108,320 POSTS

Is the engine starting while the starter continues to turn? If not, the system has a timed relay that will crank until the computer sees the RPM's increase and then turn the starter off. If the engine is starting with the starter still engaged, we have an issue with the switch not releasing.

Was this

answer

helpful?

Yes

No

+1

Sunday, December 29th, 2019 AT 6:09 PM

GGERG123

MEMBER
3 POSTS

I assumed that as well and bought another ignition/starter switch and still does the same. The car does not run at all. I had to drop the steering column to drill out the release pin as the keys were stolen and needed to change key-switch. All I did was unplug connectors and had battery disconnected the whole time. I put everything back the way it was and got that starter sticking. So I mentioned the tachometer doesen't move is that a fuse or relay that could be my issue?

Was this

answer

helpful?

Yes

No

Sunday, December 29th, 2019 AT 6:28 PM

JACOBANDNICKOLAS

MECHANIC
108,320 POSTS

The tachometer not moving indicates to me that the security system is engaged. When that happens, there is no power to the ignition system. It honestly sounds like it needs to be reprogrammed to work with the new parts. Was that done?

Joe