2002 Saturn SL1 Brake lights

Tiny
BOBBYLANCE
  • MEMBER
  • 2002 SATURN SL1
  • 4 CYL
  • 4WD
  • AUTOMATIC
  • 10,500 MILES
How do you replace the brake light switch, assuming that's the problem. Both brake lights are out and I've changed bulbs and fuses, so I'm left with the switch.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Friday, December 4th, 2009 AT 4:24 PM

3 Replies

Tiny
BLUELIGHTNIN6
  • EXPERT
Is your high-mount (third) brake lamp working good?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Friday, December 4th, 2009 AT 10:51 PM
Tiny
BOBBYLANCE
  • MEMBER
The high mount lamp is working, but I understand that is on a different mechanism than the rear lamps. Is that incorrect?
Was this
answer
helpful?
Yes
No
Saturday, December 5th, 2009 AT 9:26 AM
Tiny
BLUELIGHTNIN6
  • EXPERT
No, that is correct. It is ran by a separate relay. The brake switch is located under driver dash, mounted on the brake pedal bracket. To replace, disconnect battery. Then disconnect electrical connector from switch. Unbolt switch from mounting location and replace with new. Reconnect electrical connector and battery. Test brake lamp operation.
Was this
answer
helpful?
Yes
No
Saturday, December 5th, 2009 AT 9:28 AM

Please login or register to post a reply.

Related Brake Light Not Working Content

VIEW MORE

Sponsored links