SPONSORED LINKS

BCM after repair issue

Tiny
SQUINTYT4E
  • MEMBER
  • SATURN
Saturn SL2 2001 75k - front end accident, 2 days later remote key fob worked fine. 3 weeks later the day repairs were done - key fob doesn't work, rear defrost light won't go off, no alarm when door open with key in ignition or when lights left on, and when you press unlock inside the driver's side door stays locked. Repair shop says bad BCM but that their repairs had nothing to do with it. Can I trust that?
SPONSORED LINKS
Wednesday, May 9th, 2007 AT 5:19 PM

1 Reply

Tiny
WSCREATE
  • MEMBER
  • 59 POSTS
Get a second opinion, based on the work that was done. Have someone else confirm or rule out that the process of the work they did could have caused the bcm to go bad or what have you.

From a position of knowledge, if affirmative, go back to repair shop and relate your knowledge to them and ask them to fix it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, May 10th, 2007 AT 12:43 PM

Please login or register to post a reply.

Related Electrical BCM Content

BCM Replacement
GUIDE
BCM Replacement
As with any computer, any component inside the unit can go bad such as a transistor, IC or resistor. Subject to vibration, heat, coldness and moisture the BCM is built to...

Sponsored links