Rotational noise begins at about 20 MPH

Tiny
JOERPEARSON
  • MEMBER
  • 2003 CHRYSLER PT CRUISER
  • 2.4L
  • TURBO
  • 92,000 MILES
Hearing a rotational noise that starts around 20 MPH and remains at the same volume and type of sound. Does not increase with speed but remains at constant level until slowing below 20 MPH. Just installed 4 new tires this week and made no change.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Thursday, September 30th, 2021 AT 6:56 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • EXPERT
Hi,

Can you tell approximately where the sound is coming from? Also, is there any change in the tone or pitch if you make a turn?

I'm questioning if it is a wheel bearing. Although I would expect it to change with speed, anything is possible. Let me know if it seems to come from the front or rear.

If it is loud enough for you to record and upload, please do so for me to hear it.

Take care,

Joe
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, September 30th, 2021 AT 8:33 PM

Please login or register to post a reply.

Related Tire Replace/Remove Content

Wheel Removal and Tighten
GUIDE
Wheel Removal and Tighten
There are typically two types of wheel covers which can hinder the removal of the lug nuts and wheel. The first is the complete hubcap which needs to be removed to gain...
VIEW MORE

Sponsored links