Crankshaft pulley harmonic balancer installation

Tiny
KARYSART
  • MEMBER
  • 1996 HYUNDAI SONATA
  • 2.0L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 44,500 MILES
Need to know if the large bolt in the center of the pulley I need to remove is counterclockwise or regular clockwise. Thanks so much for your help!
Do you
have the same problem?
Yes
No
Saturday, May 30th, 2020 AT 2:28 AM

4 Replies

Tiny
DANNY L
  • EXPERT
Hello, I'm Danny.

It is counterclockwise and should be either 19 or 22 millimeter socket for size. Let me know any other information you need for this question at all. Hope this helps and thanks for using 2CarPros.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Saturday, May 30th, 2020 AT 4:30 AM
Tiny
ASEMASTER6371
  • EXPERT
Good morning,

It is a standard bolt that release counter clockwise but is very tight. I suggest using an air gun or a strong electric gun.

https://www.2carpros.com/articles/front-main-seal-replacement

Roy
Was this
answer
helpful?
Yes
No
+1
Saturday, May 30th, 2020 AT 4:32 AM
Tiny
KARYSART
  • MEMBER
Thanks so much for the information, very helpful! Will tell my buddies about your site!
Was this
answer
helpful?
Yes
No
Saturday, May 30th, 2020 AT 7:08 PM
Tiny
DANNY L
  • EXPERT
You're welcome!
Let us know how things turn out and if you have any further questions on this issue. Thanks again for using 2CarPros.

Danny-
Was this
answer
helpful?
Yes
No
Sunday, May 31st, 2020 AT 12:34 AM

Please login or register to post a reply.

Related Harmonic Balancer Replace/Remove Content

Harmonic Balancer Removal
GUIDE
Harmonic Balancer Removal
Engine harmonic balancer
VIEW MORE

Sponsored links