1990 Pontiac Grand Prix throttle position sensor

Tiny
MADDAKBRA
  • MEMBER
  • 1990 PONTIAC GRAND PRIX
Computer problem
1990 Pontiac Grand Prix 6 cyl Front Wheel Drive Automatic

what is the correct installation for a throttle positioning sensor? I installed mine but it didnt fix the problem and it should have so I think I installed it wrong!
Friday, March 13th, 2009 AT 9:38 AM

5 Replies

Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
You must disconnect battery when installing TPS.

The ECM stores a value (TPS voltage at closed throttle) and when installing new one, this value nust be cleared so ECM can "relearn" new value. Disconnecting battery will erase old value.
Was this
answer
helpful?
Yes
No
Sunday, March 15th, 2009 AT 8:22 AM
Tiny
MADDAKBRA
  • MEMBER
  • 3 POSTS
How long do I need to have the battery disconnected to restore the value when changing the throttle positioning sensor?
Was this
answer
helpful?
Yes
No
Monday, March 16th, 2009 AT 11:10 AM
Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
I would disconnect 2-3 minutes to reset the value.

TPS sends voltage to ECM.3 to 5.0v. The closed throttle voltage value must be reset since you can never install a new TPS in the same EXACT position, reading the same EXACT voltage as old one, (unless you are very good or lucky :) )
Was this
answer
helpful?
Yes
No
Wednesday, March 18th, 2009 AT 7:11 AM
Tiny
MADDAKBRA
  • MEMBER
  • 3 POSTS
Thank u! Your answer was very helpful my car is finally fixed yahoo! Thanks again
Was this
answer
helpful?
Yes
No
Thursday, March 19th, 2009 AT 12:17 PM
Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Glad to hear it, thanks for using 2carpros.
Was this
answer
helpful?
Yes
No
Friday, March 20th, 2009 AT 6:13 AM

Please login or register to post a reply.

Sponsored links