The directions in the manual are pretty general hope this helps.
POWER MIRROR ASSEMBLY
NOTE: On some models, if removing right power mirror, it may be necessary to detach part of instrument panel.
Removal & Installation
1. Remove switch plate. Remove courtesy light. Unsnap at front end and remove lock rod knob. Remove inside handle cup at notch from handle bezel. Remove screw and inside handle bezel. Using small flat-blade tool, remove armrest applique at clip. Disconnect electrical connectors. Remove screws from holes in trim panel front, courtesy light opening and top of armrest handle. Remove trim panel.
2. Peel water deflector off door inner panel. Disconnect mirror electrical connectors. Remove nuts and power mirror assembly. To install, reverse removal procedure. Tighten power mirror nuts to specification.