1998 Oldsmobile Intrigue Enhanced Traction Control System

Tiny
ABOORMAN
  • MEMBER
  • 1998 OLDSMOBILE INTRIGUE
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 245,000 MILES
HI,
I am having a problem, when I start the car there are no indicator lights on. When I put the car in reverse to exit the driveway the LOW TRACTIOn light comes on. It goes out when I put the car in drive. When I stop at a stop light and apply the brake, the TRACTION OFF light & SERVICE ENGINE SOON light comes on. The car hesitates before giong and I have to apply alot of pressure to the gas peddle to get the car moving. I have checked the brakes and calibers, replaced the wires and coils and added fuel injector cleaner. There are no codes showing when I run the computer on the scanner. Any ideas?
Tuesday, August 11th, 2009 AT 10:28 AM

1 Reply

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Hi
Heres the deal a scanner that reads engine codes can't read ABS/ETC codes need a Tech2 ie. Dealer. Some independent shops may have newer enhanced ABS scanners. That's why your not seeing codes.
Hope this helps
Thanks for donate
Was this
answer
helpful?
Yes
No
Wednesday, August 12th, 2009 AT 9:27 AM

Please login or register to post a reply.

Sponsored links