SPONSORED LINKS

All of a sudden the engine bogged down and traction control and stabilitrak lights came on

Tiny
SHARONDAILEY7976
  • MEMBER
  • 2009 CHEVROLET TRAVERSE
  • 3.6L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 105,000 MILES
It was running fine and then all of a sudden the engine bogged down and traction control and stabilitrak lights came on. Now it barely has enough power to pull its self. I put a new MAF sensor on it and clean the throttle body.
Friday, March 29th, 2019 AT 5:21 AM

5 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good morning,

Is the check engine light on? If it is, do you know the code?

Have you checked the fuel pressure? Low fuel pressure can cause this.

https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator

Do you know the code for the ABS system?

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2019 AT 5:30 AM
Tiny
SHARONDAILEY7976
  • MEMBER
  • 4 POSTS
No check engine lights are on now. I reset them.
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2019 AT 5:42 AM
Tiny
SHARONDAILEY7976
  • MEMBER
  • 4 POSTS
Still not running right.
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2019 AT 5:43 AM
Tiny
SHARONDAILEY7976
  • MEMBER
  • 4 POSTS
The only cods it was throwing were misfire 300 codes.
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2019 AT 5:44 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Okay, clearing does nothing as the issue is still present and needs to be addressed.

I would start by checking the fuel pressure as I stated. Low fuel pressure will set this code due to not enough fuel to the rail.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2019 AT 5:58 AM

Please login or register to post a reply.

Sponsored links