trouble get spark to my plugs after replacing a head gasket. Not sure why this would be an issue after not ever having an issue with spark before head gasket problem.
Saturday, December 13th, 2008 AT 9:17 AM
3 Replies
JAMES W.
MECHANIC
2,394 POSTS
I'm sure you already have, but re-check your wiring. Do you have plus voltage to the coil? Any blown fuses or pinched wires? Please advise.
Was this
answer
helpful?
Yes
No
Saturday, December 13th, 2008 AT 2:49 PM
MDC5659
MEMBER
3 POSTS
I do have voltage at the coil and I've check and rechecked the wiring. No blown fuses either.
Was this
answer
helpful?
Yes
No
Saturday, December 13th, 2008 AT 6:33 PM
JAMES W.
MECHANIC
2,394 POSTS
With 12 volts to the plus side of the coil, either the coil is bad or the trigger in the distributor. Try grounding the - negative side of the coil with quick swipes and see if you get a spark.