SPONSORED LINKS

Mazda Truck no spark

Tiny
PHIL NYLIN
  • MEMBER
  • MAZDA TRUCK
I have a 1987 mazda b2000 truck with 115,000 miles, was driving along and it just died I checked for spark and nothing, changed out the coil and still nothing. Engine turns over just fine.
Monday, April 30th, 2007 AT 10:24 AM

1 Reply

Tiny
SPIKE'S AUTOMOTIVE
  • MEMBER
  • 5 POSTS
CRANKSHAFT POSITION SENSOR (SOMETIMES CALLED CRANK ANGLE SENSOR -OR- HALL-EFFECT PICKUP TRIGGER).
ON THE TIMING COVER, NEXT TO THE HARMONIC BALANCER THE SENSOR IS ATTACHED WITH 2 7MM BOLTS, & HAS A 2 CONDUCTOR LOCKING CONNECTOR.
DEPENDING ON WHICH MOTOR YOU HAVE & WHAT YEAR IT IS TOO, YOU MAY ALSO HAVE A CAM ANGLE SENSOR.
BOTH OF THESE ITEMS NEED TO BE CHECKED, AS WELL AS ALL OF THE NORMAL TROUBLESHOOTING GUIDE OF A NO-START CONDITION ON A NEWER COMPUTERIZED MODEL.
YOU SHOULD ALSO SCAN THE COMPUTER TO SEE IF IT'S FAULTY IN THE NO-START CONDITION.
SINCERELY,
SPIKE'S AUTOMOTIVE
TNDENTERPRISES@AOL. COM
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-2
Monday, April 30th, 2007 AT 5:16 PM

Please login or register to post a reply.

Related No Spark Content

Ignition Spark Check
GUIDE
Ignition Spark Check
An engine's ignition system is responsible for igniting the fuel-air mixture inside the combustion chamber and when the ignition process stops the engine will not run....
VIEW MORE

Sponsored links