Kia Pride Scan tools & interface

Tiny
HAMED-PC
  • MEMBER
  • 1996 KIA PRIDE
  • 1.3L
  • 4 CYL
  • 2WD
  • MANUAL
  • 2,147,483,647 MILES
Hi
Good day

I have Car KIA pride 4 Cylinder. 1.3L. Include Ecu Siemens and 20pin diagnostic connector under the hood

I need How to Connect to this model For see sensor detail and ecu parameter Live data? This model Care of KIA witch protocol support? I mean use ISO14230-4 (KWP2000), ALDL, ISO9141-2, SAE J1850 VPW, SAE J1850 PWM?.
i Don't know Witch interface compatible this model and how to connect pin to pin to this connector. I need electronic diagram
thank you and Best regards
Do you
have the same problem?
Yes
No
Friday, January 1st, 2016 AT 7:01 PM

2 Replies

Tiny
HMAC300
  • EXPERT
It should be OBD2 and aldl is under lh side of steering column.
Was this
answer
helpful?
Yes
No
-1
Saturday, January 2nd, 2016 AT 6:09 AM
Tiny
HMAC300
  • EXPERT
It's obd2 and aldl means the diagnostic link connection your connector will only hook up to the 16 pins not all 20. We don'thave that model in U.S. So no info on it but it your connector should hook up to everything except the 4 top connectors also look on underside of dash lh side. They are all supposed to be there.
Was this
answer
helpful?
Yes
No
Saturday, January 2nd, 2016 AT 9:31 AM

Please login or register to post a reply.

Recommended Guides