2006 Jeep Wrangler flashers

Tiny
OKAY
  • MEMBER
  • 2006 JEEP WRANGLER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 97,000 MILES
Where is the flasher on a right hand drive I cant find it I would think it would be in the same place just backwards but I dont know where that would be I use it on a mail route I checked the bulbs and they work a person at auto store said it was the flasher so I bought it but cant find it
Do you
have the same problem?
Yes
No
Monday, August 30th, 2010 AT 4:15 PM

5 Replies

Tiny
BLUELIGHTNIN6
  • EXPERT
It uses a combination flasher so if hazards work but signals don't than flasher is OK. Flasher is located to the back of the multi-function switch housing on the top of the steering column
Was this
answer
helpful?
Yes
No
Monday, August 30th, 2010 AT 5:47 PM
Tiny
OKAY
  • MEMBER
I know how to use the flasher it does not work and neither do my blinkers the guy at the auto shop said it was the flasher. I bought the thing called a flasher it looks like a large fuse. I need to know where the fuse is
Was this
answer
helpful?
Yes
No
Monday, August 30th, 2010 AT 6:04 PM
Tiny
BLUELIGHTNIN6
  • EXPERT
?.I was not explaing how to use the hazard lights.I was explaining to you where the combination flasher (the "fuse" ) is.
Was this
answer
helpful?
Yes
No
Monday, August 30th, 2010 AT 6:06 PM
Tiny
OKAY
  • MEMBER
[quote="bluelightnin6"]?.I was not explaing how to use the hazard lights.I was explaining to you where the combination flasher (the "fuse" ) is.[/Quote still looking will let you know thank you
Was this
answer
helpful?
Yes
No
Monday, August 30th, 2010 AT 6:58 PM
Tiny
BLUELIGHTNIN6
  • EXPERT
Remove shroud around signal and wiper switch (aka multi function switch), and it is between them
Was this
answer
helpful?
Yes
No
Monday, August 30th, 2010 AT 7:11 PM

Please login or register to post a reply.

Recommended Guides