IDLE PROBLEM

1998 Toyota Camry

Tiny

Jgundy11

April, 16, 2013 AT 9:57 PM

I have a 98 toyato camry and it idles between 0 and 1 and sometimes it looses power when first starting to accelerate. And justi had a air mass flow sensor replaced. What could this be?

10 Answers

Tiny

hmac300

April, 17, 2013 AT 6:52 AM

Scan for codes and check fuel pressure first

Tiny

KHLow2008

April, 17, 2013 AT 6:54 AM

Are there any trouble codes?
Erratic idling is due to a fault with the idle control and cleaning the IAC and throttle body should help to stabilise the idling.

Tiny

Jgundy11

April, 17, 2013 AT 9:03 PM

Today I cleaned the throttle body and still. Idles

Tiny

KHLow2008

April, 18, 2013 AT 7:25 AM

Did you clean the IAC as well and check it for sticking?
Were the spark plugs checked?
Are there any trouble codes?

Tiny

Jgundy11

May, 8, 2013 AT 7:45 AM

I got the trouble codes and they are po 130/ po 106 / po 133/ po 773

Tiny

hmac300

May, 8, 2013 AT 7:49 AM

Check your O2sensorand check for a vacuum leak your map sensor is giving a reading too but it may be a vacuum leak causing the problem.

Tiny

Jgundy11

May, 8, 2013 AT 10:04 AM

Wheres the o2 sensor and which vacuum

Tiny

hmac300

May, 8, 2013 AT 10:16 AM

Take this to a pro and save your self some money, if you don't know what you are looking for

Tiny

Jgundy11

May, 8, 2013 AT 10:36 AM

Just take it to one tell em about the idlying and hand em the codes

Tiny

KHLow2008

May, 8, 2013 AT 10:39 AM

Check the MAP sensor vacuum line first. It can cause problems with erratic idling and the O2 sensor codes. The other code is the lockup clutch solenoid for the transmission. It could be faulty or the wiring circuit has a fault.

Please login or register to post a reply.

Vacuum Leak Test and Repair - All Cars
Clean Idle Air Control Ford Super Duty 5.4L
Easily Clean Your Throttle Bore Like a Pro
How to read codes Chevrolet Blazer
How to gather codes Ford Explorer