SPONSORED LINKS

1997 Honda Prelude Replacing Power Steering

Tiny
DJO_07
  • MEMBER
  • 1997 HONDA PRELUDE
  • 4 CYL
  • 2WD
  • MANUAL
  • 142,000 MILES
My power steering hose leaks, making it hard for me to be able to steer. So I need to know as much information as you can give me on how to replace my old p.S. Hose one with my new one.
Friday, June 27th, 2008 AT 3:41 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi djo_07,

1. Remove joint at pump, 2 pcs 10 mm hex bolt.

2. Remove holding bracket at intake manifold.

3. Remove hose clamp on crossmember.

4. Remove pressure switch connector on hose.

5. Use 14mm hex pipe spanner to remove pressure pipe hose joint at steering box valve body.

6. Use your imagination to figure how to get the hose out and new hose in again. ;)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, June 28th, 2008 AT 10:42 AM

Please login or register to post a reply.

Related Steering Hose Content

Steering Hose Replacement
GUIDE
Steering Hose Replacement
In a power steering system a high pressure hose and a lower pressure return line is used to transfer the steering fluid from the pump to the box or rack and pinion which...
VIEW MORE

Sponsored links