There are 2 different sizes for battery terminals but they vary by quite a lot. If the terminals are only slightly out whereby it is loose, then the terminal has been overtightened over time and this has enlarged the clamps causing them to be loose.
You have 3 options.
1. Rreplace the terminals with aftermarket parts, which requires cutting off the cable terminal end and fitting on the new terminals.
2. Use a set of pliers to reduce the clamp size by straightening them out at the curved area which has been deformed.
3. Replace the cables with OEM parts.
Tuesday, May 12th, 2009 AT 10:34 AM