SPONSORED LINKS

1991 Geo Prizm I NEED HELP!

Tiny
SPICIMA
  • MEMBER
  • 1991 GEO PRIZM
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 141,000 MILES
Ok, im pretty sure I need to change the air idle control valve. But when I went online to buy the part the picture of it doesnt look anything like what im looking at on my car. What im looking at is right beside the throttle body and has two hoses coming out. The one in the picture online looks like it should have four hoses coming out because it has four holes. Can someone help and tell me where the idle air control valve is on a 91 geo prizm and what it looks like.
SPONSORED LINKS
Thursday, August 14th, 2008 AT 11:04 AM

2 Replies

Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
It is right at the throttle plate but it has a plug not holes, what your talking about might be a vacuum componant. The iac has a little rounded point
Was this
answer
helpful?
Yes
No
Thursday, August 14th, 2008 AT 11:26 AM
Tiny
MMPRINCE4000
  • MECHANIC
  • 8,549 POSTS
The one that has two hoses coming out is called the Bi-Metal switching valve and vents to the cannister based on coolant temp.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, August 15th, 2008 AT 5:57 AM

Please login or register to post a reply.

Related Idle Air Control Replace/Remove Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links