OBD II codes

ZOGGIN

MEMBER
FORD TAURUS

What do codes p1131, 1132, p1130, and PO 0310 mean?

I have 1998 ford taurus se with a 24v 3.0L v6. What do I need to do to fix this problem?

Thursday, January 25th, 2007 AT 4:48 PM

1 Reply

SERVICE WRITER

MECHANIC
9,123 POSTS

Hey Zog<

The 0310 is a misfire detection that should be ignored at this point. The other ones are a lean condition that is being corrected by increasing the richness. Start with a fuel pressure check for specifation being too low.

Please login or register to post a reply.

P1190

The Problem With My Car Is That It Has The Check Engine Light On And I'm Not Sure Why It Has It On. What I Have Done Is Connected A...

Asked by carinaguardado ·

1 ANSWER

2002

FORD TAURUS

2003 Ford Taurus P1131

Had The P1131 Code Scanned At Autozone, With The Definition Lack Of Bank 1 O2 Transition And Explanation Ecm Detected A Bank 1 O2 At Its...

Asked by fuzeman ·

1 ANSWER

2003

FORD TAURUS

2003 Ford Taurus Engine Code 336

Shows Engine Code 336 Which Is Crankshaft Position Sensor Range Or Performance. I Replaced The Sensor And The Code Is Still Present. I...

Asked by baba1943 ·

18 ANSWERS

2003

FORD TAURUS

My Ac Compressor Went Bad In My 2001 Ford Taurus - 3.0...

I Replaced The Compressor (came With A Clutch And Pag Oil), Replaced The Accumulator, Replaced The Orifice Tube, And Had The Shop Service...

Asked by Jasoneus2000 ·

11 ANSWERS

2001

FORD TAURUS

2003 Ford Taurus Check Engine Code

I Took My Car In And Had It Looked At After The Light Check Engine Light Came On. The Problem Was The Forth Cylinder Was Mis-firing. I Fixed...

Asked by cwbchris ·

3 ANSWERS

2003

FORD TAURUS

Sponsored links

Ask a Car Question. It's Free!

OBD II codes

1 Reply

Please login or register to post a reply.

Related P1130 Content

P1190

2003 Ford Taurus P1131

2003 Ford Taurus Engine Code 336

My Ac Compressor Went Bad In My 2001 Ford Taurus - 3.0...

2003 Ford Taurus Check Engine Code

Sponsored links