04 mach 1

Tiny
TONY D
  • MEMBER
  • 2004 FORD MUSTANG
How can I improve my throttle response on my 04 mustang mach 1 w/ 4.6l double overhead can 32 valve automatic. I already made a donation and never recieved a response from you guys. This one's on you guys :D
Do you
have the same problem?
Yes
No
Friday, March 16th, 2007 AT 5:12 PM

5 Replies

Tiny
TAURUSWHEEL
  • MEMBER
What's the matter with the throttle response? Any codes or check engine light?
Was this
answer
helpful?
Yes
No
Friday, March 16th, 2007 AT 5:33 PM
Tiny
TONY D
  • MEMBER
Seems slughist, not enough get up and go, if you know what I mean, especially around 30-45 mph.
Was this
answer
helpful?
Yes
No
Friday, March 16th, 2007 AT 9:02 PM
Tiny
TONY D
  • MEMBER
No codes or check engine light, I'd wish it would respond as if it were a stick, Is it just the fact that it's an automatic, that it feels that way? : Alot of the mustang sites suggest after market throttle bodies like bbk or accufab to inprove the throttle response, what you think?And thanks for getting back with me, I really appreciate it. :Mrgreen:
Was this
answer
helpful?
Yes
No
Friday, March 16th, 2007 AT 9:10 PM
Tiny
TAURUSWHEEL
  • MEMBER
So basically you're just looking to hop it up? If you're going that route make sure whatever you buy is calibrated to work together and with your existing engine control system, some kits include new pcm parts. If you just throw stuff on it, you're looking for problems where engine control is concerned, even something like a cold-air intake can present issues, not always but I've seen enough posts aroung the web on it. Also if emission testing is required in your area, aftermarket can create headaches with that if not a calibrated system. Check Ford Motor Company's website I know they sell factory hop-ups for the new Mustangs that work in conjunction with the oem pieces.
Was this
answer
helpful?
Yes
No
Saturday, March 17th, 2007 AT 5:36 PM
Tiny
TONY D
  • MEMBER
Thanks for all your advise, I'll try your suggestion. -Thanks again- Tony d :D
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2007 AT 11:34 AM

Please login or register to post a reply.

Related General Content

Drill Out a Bolt and Tap a Thread
VIDEO

Recommended Guides