2000 Ford Expedition how to install an EGR pressure sensor

Tiny
BOBO28
  • MEMBER
  • 2000 FORD EXPEDITION
2000 Ford Expedition V8 Two Wheel Drive Automatic

I would like to know how to install an egr pressure sensor on a 2000 ford expedition
Do you
have the same problem?
Yes
No
Saturday, July 24th, 2010 AT 1:29 PM

1 Reply

Tiny
RASMATAZ
  • EXPERT
REMOVAL
Disconnect the battery ground cable. For additional information, refer to Battery.


https://www.2carpros.com/forum/automotive_pictures/12900_egr_4.gif



Remove the bolts and remove the engine appearance cover (if equipped). NOTE: The 4.6L engine is shown, the 5.4L engines are similar.


https://www.2carpros.com/forum/automotive_pictures/12900_egr1_2.gif



Remove the differential pressure feedback EGR.
1 Disconnect the electrical connector.
2 Disconnect the hoses.
3 Remove the bolts (nuts if applicable).

INSTALLATION
To install, reverse the removal procedure.

https://www.2carpros.com/kpages/auto_repair_manuals_alldata.htm
Was this
answer
helpful?
Yes
No
+1
Sunday, July 25th, 2010 AT 2:48 AM

Please login or register to post a reply.

Sponsored links