2002 Ford Escape shut off

Tiny
CHALO
  • MEMBER
  • 2002 FORD ESCAPE
Engine Performance problem
2002 Ford Escape 6 cyl All Wheel Drive Automatic

I Have problem like vacuum leaking, because when I start The motor everythin runing good but when I accelerate the motor shut off, and I found one of the vacuum hose become close at the elbow on the intake exit, I unplug the hose from the intake and on the front of motor but the hose is correct nothing is broken, could you help to find the leak, thanks
Do you
have the same problem?
Yes
No
Thursday, November 5th, 2009 AT 7:42 AM

5 Replies

Tiny
CJ MEDEVAC
  • EXPERT
Are VACUUM OK.
Was this
answer
helpful?
Yes
No
Friday, November 6th, 2009 AT 11:56 PM
Tiny
CJ MEDEVAC
  • EXPERT
GOOD LUCK!
Was this
answer
helpful?
Yes
No
Saturday, November 7th, 2009 AT 12:02 AM
Tiny
CHALO
  • MEMBER
Well I found code P0113, IAT Sensor 1 circuit high input, are you think that is the cause of my engine stall, thanks Gonzalo
Was this
answer
helpful?
Yes
No
Sunday, November 8th, 2009 AT 3:38 AM
Tiny
CJ MEDEVAC
  • EXPERT
Looks like you are on right track
Was this
answer
helpful?
Yes
No
Sunday, November 8th, 2009 AT 5:17 AM
Tiny
CHALO
  • MEMBER
Do you know how much the MPC-161 because I trhink this is broken or something burning after a booster on the wrong polaryti, and that could be fix my problem for stalling motor.
Was this
answer
helpful?
Yes
No
Tuesday, November 17th, 2009 AT 7:21 PM

Please login or register to post a reply.

Recommended Guides