1986 Ford Bronco wont start

Tiny
PARKERBO
  • MEMBER
  • 1986 FORD BRONCO
Computer problem
1986 Ford Bronco 6 cyl Four Wheel Drive Manual

well first the fuel pumps wouldnt turnon. So I hot wired them. It still wont start because the injectors wont open. I hooked up a code reader and it just emmits a single continuous tone without stopping. I was wondering what the likely hood of a bad eec module is. Or if you have any ideas on what may really be wrong.
Do you
have the same problem?
Yes
No
Friday, January 2nd, 2009 AT 2:07 AM

3 Replies

Tiny
RASMATAZ
  • MEMBER
Have you tested the EEC power relay. If not test it-

Check the injectors red wire for power -turn key to On -do you have it-if so check the ECU ground drivers
Was this
answer
helpful?
Yes
No
Friday, January 2nd, 2009 AT 3:15 AM
Tiny
PARKERBO
  • MEMBER
Well the ecu gets power. It turns over and dummy lights come on. Its just that the fuel delivery system wont activate from pump to injector
Was this
answer
helpful?
Yes
No
Friday, January 2nd, 2009 AT 8:58 AM
Tiny
RASMATAZ
  • MEMBER
Check my last suggetion when completed then comback
Was this
answer
helpful?
Yes
No
Friday, January 2nd, 2009 AT 11:59 AM

Please login or register to post a reply.

Recommended Guides