Engine not starting

Tiny
WUBSHET WORKNEH
  • MEMBER
  • 2012 SUZUKI WAGON
  • 1.2L
  • 3 CYL
  • 2WD
  • AUTOMATIC
  • 2,012 MILES
After rebuilding the engine, on the gauge there is a light is blinking when the key is on and cranking. I checked so many things like; camshaft position sensor, pulley sensor, spark plug ignition coil, all the electric line and fuse are checked. But the red light is blinking on the gauge. How can I start the engine and solve the light?
Do you
have the same problem?
Yes
No
Thursday, November 12th, 2020 AT 2:13 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • EXPERT
Hi,

I'm not sure which model you have, but can you identify what light (red) is flashing? Also, if possible, can you record what is happening so I can both hear the engine cranking and see what it's doing?

Here is a link that explains things to check with a crank no start condition. Take a look through it and see if it helps in any way.

https://www.2carpros.com/articles/car-cranks-but-wont-start

Let me know.

Joe
Was this
answer
helpful?
Yes
No
Thursday, November 12th, 2020 AT 3:23 PM
Tiny
WUBSHET WORKNEH
  • MEMBER
2012, k6A, every wagon.
Was this
answer
helpful?
Yes
No
Friday, November 13th, 2020 AT 7:09 AM
Tiny
JACOBANDNICKOLAS
  • EXPERT
Hi,

That model isn't offered in the US, so my technical info is very limited. However, I'll try to help.

The red light that blinks, is it a security indicator? Does the vehicle have an anti-theft system? If so, is it an original equipment product or something that was added?

Let me know.
Joe
Was this
answer
helpful?
Yes
No
+1
Friday, November 13th, 2020 AT 7:34 PM

Please login or register to post a reply.

Sponsored links