SPONSORED LINKS

1994 Other Dodge Models cutoff switch

Tiny
ARTCASTRO
  • MEMBER
  • 1994 DODGE
Electrical problem
1994 Other Dodge Models 6 cyl Two Wheel Drive Automatic

i have replaced the fuel filter and the fuel pump, but the car won't start. I have tried to crank it but no luck on that, I would like to find the fuel cutoff switch and dont know where it is located, I would think this is my next step
SPONSORED LINKS
Saturday, July 31st, 2010 AT 4:32 PM

6 Replies

Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
What model of Dodge you working with? It may not have a fuel cutoff switch.
Was this
answer
helpful?
Yes
No
Saturday, July 31st, 2010 AT 4:56 PM
Tiny
ARTCASTRO
  • MEMBER
  • 4 POSTS
It is a 1994 dodge plymouth acclaim v6
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, July 31st, 2010 AT 5:42 PM
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
That vehicle doesn't have a fuel cut off (inertia) switch. Will need to test the fuel pressure to ensure that it is even a fuel problem. It may be no spark condition.
Was this
answer
helpful?
Yes
No
Saturday, July 31st, 2010 AT 7:35 PM
Tiny
ARTCASTRO
  • MEMBER
  • 4 POSTS
Then why is it that the pump is not working when I replaced the fuel pump and fuel filter, what other thing can be preventing the cutoff to the fuel pump if it doesn't have the enertia, is there something else like a relay or fuse?
Was this
answer
helpful?
Yes
No
Saturday, July 31st, 2010 AT 7:45 PM
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Ok if you know that the pump is not getting power than need to check fuel pump relay located in engine bay, forward of left strut tower.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, July 31st, 2010 AT 7:53 PM
Tiny
ARTCASTRO
  • MEMBER
  • 4 POSTS
Really appreciate your help, I was an intermediate of this conversation, my dad found your info very helpful.
Was this
answer
helpful?
Yes
No
Saturday, July 31st, 2010 AT 8:39 PM

Please login or register to post a reply.

Sponsored links