how do I change the starter on my dakota? how many bolts are there?
Sep 2, 2008 at 8:29 PM
1992 Dodge Dakota starter
1992 DODGE DAKOTA
LILMONTANAGAL2000
- MEMBER
- 1 POST
- FOLLOW
Advertisement
JACOBANDNICKOLAS
- ✓ASE Certified Mechanic
- 110,193 POSTS
Hi:
Replacing the starter on a dakota will require patiences. Only two bolts hold the starter on, but getting to them is the hard part. If you have a skid plate under the vehicle, remove it. Next, you will need to open the driver's side inner fender so you can see the starter. Make sure to disconnect the battery then you can work on it.
If you have any specific questions, let me know.
joe
Replacing the starter on a dakota will require patiences. Only two bolts hold the starter on, but getting to them is the hard part. If you have a skid plate under the vehicle, remove it. Next, you will need to open the driver's side inner fender so you can see the starter. Make sure to disconnect the battery then you can work on it.
If you have any specific questions, let me know.
joe
Oct 2, 2008 at 10:52 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.