ASK A QUESTION
BECOME A MEMBER
Login with Facebook
NOT A MEMBER?
TERMS AND CONDITIONS
2001 Chevy S-10 intake manifold
2001 CHEVROLET S-10
What are the torque spec for the intake manifold bolts?
have the same problem?
Friday, February 22nd, 2008 AT 3:12 PM
Lower intake- 3 passes, 1-27inch lbs, 2-106 inch lbs, 3- 134 inch lbs.
Upper - 2 passes, 1- 44 inch lbs, 2-80 inch lbs
Friday, February 22nd, 2008 AT 4:00 PM
Id go with 100 inch pounds of torque per bolt
Friday, February 22nd, 2008 AT 4:02 PM
to post a reply.
Related Intake Manifold Torque Content
1995 Chevy S-10 Torque Specs.
Torque Specs. For Intake Manifold Bolts?
2003 Chevy S-10 Noise After Replace The Intake...
Hi, Last Week I Took My 2003 Chevy S10 4x4 Zr5 4.3 Litres To Canadian Tire To Change 1 Head Light. They Made A Visual Inspection On My...
Changed Intake Had To Reset Timing
Chevy S10 Knocking After I Changed The Intake Gaskets. Had A Problem With Timing The Distributor Didn't Fit Back In The Same Way So After...
1992 Chevy S-10 Intake Leak
My 92 S10 4.3 Vin Z Has A Proublem, If You Tap The Gas It Will Rev Then Rev To About 2000 Rpm Then Come Down Slowly It Had A M.A.P Sensor...
1992 Chevy S10, 4.3 Motor Intake Manifold Is Leaking At The Backside. Having Checked Out Gasket Sets I See There Is No Gasket For Front Or...
Ask a Car Question. It's Free!
Online car repair manuals
Terms & Conditions
© 1999 - 2023 2CarPros, Inc.