1995 Chevy Lumina door panel

Tiny
RUSTICRADIO
  • MEMBER
  • 1995 CHEVROLET LUMINA
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 96,000 MILES
Hi There,

How do I remove the front right door panel on my 95 Chevy Lumina Minivan so I can replace the window motor?

I will donate for helpful answer.

Many Thanks, Rustic
Do you
have the same problem?
Yes
No
Saturday, July 19th, 2008 AT 7:10 PM

2 Replies

Tiny
STANG007
  • MEMBER
  • 29 POSTS
Look in the handle there should be a screw there. Look under the door im not sure if there are some screws there (the lumina car has some there) if not check for clips under the door. There should be clips in the top of the door too. When all screws are unscrewed just push the door upward and the clips should get out.
Was this
answer
helpful?
Yes
No
Sunday, July 20th, 2008 AT 11:23 PM
Tiny
JALOPYPAPA
  • MEMBER
  • 467 POSTS
Pry out any plugs hiding screws, and any inside the arm rest, and remove the screws in the door handle recess. Pry the door lock handle off its rod. Use a screwdriver or pry tool to pop out the nylon fasteners around the bottom and sides of the panel. Unfasten the window switch wires. Pull the panel straight up. Carefully pull off the plastic liner. Remove a couple more brackets. Tape up the window and remove the bolts holding it to the regulator. To remove the motor, drill/chisel out the rivets holding the regulator. Unplug the motor and pull the regulator and motor out together.
Was this
answer
helpful?
Yes
No
Monday, July 21st, 2008 AT 10:58 PM

Please login or register to post a reply.

Sponsored links