1993 Chevy Camaro Wont Start

Tiny
FULLTHROTTLE0408
  • MEMBER
  • 1993 CHEVROLET CAMARO
  • 6 CYL
  • 2WD
  • MANUAL
  • 130,000 MILES
I replaced the steering collum on my 93 camaro and got a used steering collum off another 93 camaro. I installed it and it will not start, I turn the key and a little box clicks underneath the dash but does not attempt to start. The security light also stays on during the entire process. Could it be the key because it has a chip in it. Thank you in advance.
Monday, March 9th, 2009 AT 12:53 AM

1 Reply

Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Try resetting the security system:

GM PASS LOCK RELEARN- Ignition to "run" position, try to start and let key return to "run" position
Approx ten minutes security light will go off
Turn key "off" and wait 5 seconds
Repeat 2 more times for a total of 3 relearns.
Turn key off, then start it
Was this
answer
helpful?
Yes
No
Wednesday, March 11th, 2009 AT 8:47 AM

Please login or register to post a reply.

Related Engine Not Running Content

Car Cranking but Not Starting? Try This
VIDEO
Car Cranking but Not Starting? Try This
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE