1996 Chevy Blazer need help with breakes

Tiny
LAURALOU0084
  • MEMBER
  • 1996 CHEVROLET BLAZER
Brakes problem
1996 Chevy Blazer

we had a busted break line changed it during the bleeding of the breaks got no fluid out of the rear so retried several of times still nothing so we changed master cylinder 2 times and still nothing we blew out the lines and still can not get nothing out of the rear. The front bleeds find can you help me
Do you
have the same problem?
Yes
No
Tuesday, October 28th, 2008 AT 12:04 PM

2 Replies

Tiny
RHALL77
  • MEMBER
Check and make sure the bleeders are not plugged
Was this
answer
helpful?
Yes
No
Tuesday, October 28th, 2008 AT 3:45 PM
Tiny
SWILLIAMS
  • MEMBER
Also check the proportioning valve is locked open. It probably shifted to the side that lost the line and is stuck there. You need to center it so fluid will flow. If you don't have ABS it will be directly below the master cylinder. If you have ABS it is in one section of the ABS controller. Either way you use a tool to hold it centered while you bleed the brakes.
Was this
answer
helpful?
Yes
No
Thursday, October 30th, 2008 AT 11:38 AM

Please login or register to post a reply.

Recommended Guides