1995 Chevy Blazer engine swap

Tiny
KAEDO
  • MEMBER
  • 1995 CHEVROLET BLAZER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 224,000 MILES
I have a 95 chevy blazer 4 door 4x4. 4.3 L vortec. I would like to put a small block 350 into it. I was wondering what is everything I would need to change/modify ( mounts, wiring, sensors, years of motors, etc.) Is this a good idea?
Do you
have the same problem?
Yes
No
Tuesday, March 10th, 2009 AT 1:02 PM

1 Reply

Tiny
MIKE H R
  • MECHANIC
  • 3,094 POSTS
Changing from a 6 cylinder to a v8 you would need to change the motor mounts, exhaust, transmssion to handle the increase horspower you might get away with the rear end and front drive axle but remember they were for a six cylinder. The computer would most likely have to be changed also. It can be done. You can check with summit racing. Com they have most everything you would need and can direct you further in replacing the engine.
Was this
answer
helpful?
Yes
No
Sunday, March 15th, 2009 AT 10:59 AM

Please login or register to post a reply.

Sponsored links