SPONSORED LINKS

1992 Chevy Beretta replacing CV Joints

Tiny
COOKL
  • MEMBER
  • 1992 CHEVROLET BERETTA
Drive Train Axles Bearings problem
1992 Chevy Beretta 6 cyl Front Wheel Drive Automatic

I have a 92 beretta which is giving me troubles. I was able to get the CV joint out of the outer sides but not from the transmission. They act like they are stuck. I've replaced CV joints before in other cars and usually they come out fairly easy, but this one has me confused. Cound you please tell me the best way to get these CV joints out so I can put the new ones in? Thanks for your help!
SPONSORED LINKS
Sunday, August 22nd, 2010 AT 5:56 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Get a big scredriver or pry bar and get it between the trans and joint and give it a good tug it should come out. You should replace the trans seal when doing this as well.
Was this
answer
helpful?
Yes
No
Tuesday, September 14th, 2010 AT 5:55 PM

Please login or register to post a reply.

Related CV Axle Replace/Remove Content

CV Axle Replacement
GUIDE
CV Axle Replacement
All front wheel drive and independent rear suspension cars utilize a CV axle to deliver power from the engine to the wheels. These CV axles have a six balls inside a CV...

Sponsored links