SPONSORED LINKS

1993 Buick Lesabre car stalls in drive not in reverse

Tiny
GTOWN76
  • MEMBER
  • 1993 BUICK LESABRE
1993 Buick Lesabre 6 cyl Automatic

My baby smoothly stalls in drive, no stumbling or idling down. It operates normally in park, neutral, and reverse. Two weeks before it started the car would intermittently stall when accelerating from a light. Before anyone suggests the tcc, is it possible for it to stall the engine in all drive gears and not in reverse.
SPONSORED LINKS
Tuesday, April 15th, 2008 AT 8:38 AM

3 Replies

Tiny
DENNYP
  • MECHANIC
  • 1,823 POSTS
Check it for trouble codes. It could be the MAF sensor. The tcc should stall in reverse also if it's bad.
Was this
answer
helpful?
Yes
No
Sunday, April 20th, 2008 AT 7:26 AM
Tiny
GTOWN76
  • MEMBER
  • 2 POSTS
The voltage readings from the maf were at 2.43 at idle, but drop to 2.35 with throttle applied. Is that normal?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, April 22nd, 2008 AT 1:17 PM
Tiny
DENNYP
  • MECHANIC
  • 1,823 POSTS
If you look through the MAF sensor, is it really dirty or does it look like it's melted? If so, you should probably replace it.
Was this
answer
helpful?
Yes
No
Tuesday, April 22nd, 2008 AT 10:08 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links