Can you give me a ballpark figure for labor only to replace the rack and pinion along with upper and lower ball joints?
Apr 17, 2009 at 7:43 AM
1991 Acura Legend Labor Cost
1991 ACURA LEGEND
LESREYNOLDS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi lesreynolds,
Thank you for the donation.
Labor time for ereplacement of steering rack is 4.2 hours.
Both lower ball joints are 2.2 hours, one side would be 1.2 hrs
Upper control arm ball joints do not have service parts. Parts are replaced as assys.
0.7 hr for one side and 1.2 hr for both.
You have to check the going labor rate according to local conditions and multiply by the labor time.
Thank you for the donation.
Labor time for ereplacement of steering rack is 4.2 hours.
Both lower ball joints are 2.2 hours, one side would be 1.2 hrs
Upper control arm ball joints do not have service parts. Parts are replaced as assys.
0.7 hr for one side and 1.2 hr for both.
You have to check the going labor rate according to local conditions and multiply by the labor time.
Apr 17, 2009 at 10:38 AM
Advertisement