After replacing the clutch actuator fluid no leaks found and the code still comes up?

Tiny
HSNDSOME
  • MEMBER
  • 2020 HONDA JAZZ
  • 20,000 MILES
2020 Honda Vezel hybrid P287c, I replaced clutch actuator fluid no leaks found. I perform all steps in learning/calibration values an code still comes back up. I'm thinking it's the dual clutch system. Please guide.
Thursday, September 25th, 2025 AT 9:19 AM

3 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 54,137 POSTS
Yep you are correct, this problem is for the dual clutch system, is this car raced by chance?

P287C: Clutch "B" Stuck Engaged

If so I would check out and replace the actuator first, and if that doesn't help the transmission will need to come out and the clutch inspected. Please upload pictures or videos in your response of any problems so we can see.
Was this
answer
helpful?
Yes
No
Friday, September 26th, 2025 AT 9:38 AM
Tiny
HSNDSOME
  • MEMBER
  • 37 POSTS
Private use only 20.000km.
Was this
answer
helpful?
Yes
No
Friday, September 26th, 2025 AT 4:18 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 54,137 POSTS
Okay, then I would replace the actuator which fail often, the clutch should be okay. Clear the codes once the job is completed.
Was this
answer
helpful?
Yes
No
Saturday, September 27th, 2025 AT 10:50 AM

Please login or register to post a reply.

Related Transmission Clutch Replace/Remove Content